Unify OpenScape CP700 User Manual Download Page 189

Page: 189 / 243

189

Appointment function

You can arrange for the communications system to remind you of an appoint-
ment



page 190. For this to happen, you need to save the desired times of the

calls. This is possible for a period of up to 24 hours in advance or for a daily re-
peating appointment.

Save appointment

Press the Main Menu key, if needed.

Open using the Softkey.

Open with the Softkey.

€

Select "Timed reminder on".

Confirm.

Enter a 4-figure time, e.g. 0905 for 9.05 a.m. or 1430 for 2.30 p.m.

if needed

With the "American" language setting (setting



page 76) you can enter Code 2

for "a.m." or 7 for "p.m." (default = "a.m.").

Confirm.

Deleting/querying a saved appointment

Press the Main Menu key, if needed.

Open using the Softkey.

Open with the Softkey.

€

Select "Timed reminder off".

Confirm.

Service/Settings

Service Menu

Timed reminder on

One time only

Daily

Save

Service/Settings

Service Menu

Timed reminder off

Delete

Exit

Summary of Contents for OpenScape CP700




















































































































































































































































Search results

Summary of Contents for OpenScape CP700

Reviews:

Unify OpenScape CP700, User Manual, Page: 189 / 243

Search results

Summary of Contents for OpenScape CP700

Reviews: