Unify OpenScape CP700 User Manual Download Page 194

Page: 194 / 243

194

Transfer connection to next phone

If you want to transfer your connection from the first "guest phone" to a second
"guest phone", log in to the second "guest phone" as normal (see



page 193).

If you log in to another phone with your PIN number, without first logging out of
the other phone, logout will take place automatically.

Logging off from the "guest phone"

If you no longer require a connection to the "guest phone", and/or if you want to
change to another phone, log off the "guest phone".

Press the "Mobile login" key.

if no key is configured,

Press the Main Menu key, if needed.

Open using the Softkey.

Open with the Softkey.

€

Select "More features".

Confirm.

€

Select "Mobile logoff".

Confirm. The logoff procedure starts.

The "guest phone" is now once more available with its original phone number,
features, and functions. Any call forwarding that may have been set up can be
removed.

Mobile login

Service/Settings

Service Menu

More features

Mobile logoff

Summary of Contents for OpenScape CP700




















































































































































































































































Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands

Unify OpenScape CP700, User Manual

Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands