Unify OpenScape CP700 User Manual Download Page 139

Page: 139 / 243

139

Sending a vCard

Sending to a paired device

Prerequisite:

The receiving device is included in the list of paired devices, Blue-

tooth is activated on the device and can receive vCards.

€

Select the required contact from the Conversations menu.

The selected contact is highlighted.

Open the contact.

Press the Softkey. The menu for paired devices opens. A search is initiated for
devices.

Use the Softkey to confirm sharing on the relevant paired device. The vCard for
the entry is sent. (You will receive confirmation).

Perform the necessary steps on the destination device to save the vCard data.

Sending to an unpaired device

Prerequisite:

Bluetooth is activated on the device and the device can receive

vCards.

€

Select the required contact from the Conversations menu.

The selected contact is highlighted.

Open the contact.

Press the Softkey. The menu for paired devices opens. A search is initiated for
devices. Wait until the relevant unpaired device appears.

Use the Softkey to confirm sharing on the relevant device. The vCard for the en-
try is sent (you will receive confirmation).

Perform the necessary steps on the destination device to save the vCard data.
Detected devices are then deleted from the list.

Georg Simon Ohm

- O

Share contact

‡

†

Smartphone

‡

Georg Simon Ohm

- O

Share contact

‡

†

Tablet

‡

Summary of Contents for OpenScape CP700




















































































































































































































































Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands

Unify OpenScape CP700, User Manual

Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands