manualshive.com logo in svg

Unify OpenScape CP700, User Manual

The Unify OpenScape CP700 Quick Reference Card is a must-have manual for users of this cutting-edge device. It provides clear and concise instructions to maximize its capabilities. Download this helpful guide for free from manualshive.com and harness the full potential of your Unify OpenScape CP700.

Share
Download
background image

9

Forwarding calls for lines  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Switch calls directly to executive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

Group calls / hunt group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

Group call on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Accepting calls for a colleague in the team. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Connecting call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   173
Calls on Universal Call Distribution (UCD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

Private sphere/security  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178

Activating/deactivating idle function  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   178
Activating/deactivating do not disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   178
Caller ID suppression . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

Protecting the phone from misuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Locking a different phone to prevent misuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Saving personal lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
User password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Locking the phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

Other settings and functions  . . . . . . . . . . . . . . . . . . . . . . . . . 186

Connection costs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   186

Display connection costs for your phone (not for U.S.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Query connection costs for another phone 
(not for U.S.)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Calling with call charge assessment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188

Appointment function  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189

Save appointment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Using timed reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190

Using a different phone for a call in the same way as your own . . . . . . . . . . . . . . . . . . . . . . . . 191
Using a mobile connection to a different phone  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192

Mobility variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Logging on to the "guest phone"  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Transfer connection to next phone  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Logging off from the "guest phone" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

Incoming fax message/message on the answering machine . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Resetting services/functions
(complete phone deletion). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   195
Activating functions for another phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Using system functions externally
DISA (Direct Inward System Access) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Controlling connected computers/programs/phone information service . . . . . . . . . . . . . . . . . . 198
Searching for people (not for U.S.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Watching a video stream through a camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200

How to program a camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200

Summary of Contents for OpenScape CP700




















































































































































































































































Reviews:

No comments

Related manuals for OpenScape CP700

Aastra 6725ip Quick Start Manual preview
6725ip
Brand: Aastra Pages: 9
E-Boda Sunny V38 Quick Start Manual preview
Sunny V38
Brand: E-Boda Pages: 50
Olitech Easy Mate 3G Instruction Manual preview
Easy Mate 3G
Brand: Olitech Pages: 12
Positron IP408 User Manual preview
IP408
Brand: Positron Pages: 84
OneTouch Flash Mini 4031D Quick Start Manual preview
Flash Mini 4031D
Brand: OneTouch Pages: 21
Alcatel One Touch Scribe easy 8000A Quick Start Manual preview
One Touch Scribe easy 8000A
Brand: Alcatel Pages: 23
Blackberry 9000 - Bold Tips preview
9000 - Bold
Brand: Blackberry Pages: 4
Doro PHONEEASY 410S gsm User Manual preview
PHONEEASY 410S gsm
Brand: Doro Pages: 140
NEFFOS Y5L User Manual preview
Y5L
Brand: NEFFOS Pages: 69
UTStarcom ARC VMUTX1 Getting Started Manual preview
ARC VMUTX1
Brand: UTStarcom Pages: 35
Zte F285 User Manual preview
F285
Brand: Zte Pages: 79
Verykool i270 User Manual preview
i270
Brand: Verykool Pages: 62
Blackberry 8120 - Pearl - GSM Safety And Product Information preview
8120 - Pearl - GSM
Brand: Blackberry Pages: 33
Lenovo P707 User Manual preview
P707
Brand: Lenovo Pages: 33
Lenovo moto m Read Me preview
moto m
Brand: Lenovo Pages: 21
Lenovo PB1-750M Hardware Maintenance Manual preview
PB1-750M
Brand: Lenovo Pages: 74
Lenovo P70-A Service Manual preview
P70-A
Brand: Lenovo Pages: 41
Lenovo PB2-650M Safety, Warranty & Quick Start Manual preview
PB2-650M
Brand: Lenovo Pages: 144

Brands by name

Popular brands

Load more brands