Page 29
Version 3.3 / November 2016
Figure 59
Figure 60
Figure 61
Figure 62
To install the espresso group carry-out the abovementioned actions in reverse sequence.
Removing the espresso group:
1.
Disconnect the hot water supply pipe, unclamping the fixator (see figure 59)
2.
Disconnect the ready drink dispensing pipe together with the nozzle from the holder, lifting the spring
used to fix the pipe (see figure 60)
3.
Turn the espresso group fixation screw counter clockwise (1) (see figure 61)
4.
Lift the right lower end of the espresso group (2) then pull it out (3) (see figure 61)
5.
Remove the espresso group (see figure 62)
1
2
3