Unicum ROSSO User Manual Download Page 86

Page: 86 / 88

ROSSO / ROSSO INSTANT

Page 86

Version 3.3 / November 2016

ТМ

5.0 WORKING WITH USB FlASH DRIVE

The machine’s Regulator allows Machine’s configuration, software updates and data recovery by ex

changing files using a USB drive (flash drive).

The drive is connected to the USB connector on the Regulator’s board (see figure 70, position 3). The

USB must be connected while in sales mode. When you connect the USB drive the Machine’s display will

show relevant information about the drive.

ATTENTION! To work with the machine is only suitable USB-flash drives! Disk drives and flash drives

are not supported. Supports USB-flash drives with FAT16 or FAT32. Other file systems (including NTFS)

not supported.

Information that can be read on the USB-flash drive with the machine:

•

Statistical data (Audit)

Information about the Machine’s operations, sales, equipment functioning

and logs.

Stored in a file format EVA-DTS, file name:Axxmmddi.DTS.

If the Machine’s clock’s not work-

ing the file name will be Axx_i.DTS.

- хх =

last two digits of the serial number, set in clause 1.1.2 of the Technician’s menu.

- mm = Month (if date and time are set for the Machine)

- dd = Day (if date and time are set)

- i = digit from 0 to 9. You can save up to 10 files with different names in 24 hours.

To read the information you want to insert USB-flash drive into the connector of the controller board in

the trade regime and approve the request: ‘

‘Save audit?’’

• The current configuration:

File format EVA-DTS. File name: Cxxxxxxx.DTS, C then the 7-digit serial

number of the machine, specified in clause 1.1.2 of

he Technician’s menu (for example: C0000123.

DTS).

This file contains equipment configuration information, as well as information about the names, place

ments and prices of products.

To read the information you want to insert USB-flash drive into the connector of the controller board in

the trade regime and approve the request:

‘‘Write Configuration?’’

Information that can be downloaded from the USB-flash drive into the machine:

•

Configuration of a certain Machine:

File format EVA-DTS. File name: Cxxxxxxx.DTS, C then the

7-digit serial number of the machine, specified in clause 1.1.2 of he Technician’s menu. The file will be

loaded into the machine only when the coincidence of numbers specified in clause 1.1.2 and in the file

name. This allows you to load from one USB-flash drive different configurations for different machines.

To download the information you

want to insert USB-flash drive into the connector of the controller board

in the trade regime and approve the request:

‘‘Load Configuration?’’

Summary of Contents for ROSSO

























































































Search results

Summary of Contents for ROSSO

Reviews:

Related manuals for ROSSO

Brands by name

Popular brands

Unicum ROSSO, User Manual

Search results

Summary of Contents for ROSSO

Reviews:

Related manuals for ROSSO

Brands by name

Popular brands