Unicum ROSSO User Manual Download Page 73

Page: 73 / 88

ROSSO / ROSSO INSTANT

Page 73

Version 3.3 / November 2016

ТМ

Sub-menu

Description

1.9.7.3 Test sugar

Sugar and spoon dispensing mechanism

1.9.7.3.1 Sugar motor

Test the sugar dispensing motor

1.9.7.3.2 Spoon motor

Test the spoon dispensing mechanism

1.9.7.3.3 Sugar/Spoon

Test the dispensing of sugar and spoon

1.9.7.3.3.1

Sugar Quantity 0

When entered it dispenses the spoon

1.9.7.3.3.2

Sugar Quantity 1

When entered the machine dispenses one portion of sugar

1.9.7.3.3.3

Sugar Quantity 2

When entered the machine dispenses two portions of sugar

1.9.7.3.3.4

Sugar Quantity 3

When entered the machine dispenses three portions of sugar

1.9.7.3.3.5

Sugar Quantity 4

When entered the machine dispenses four portions of sugar

1.9.7.3.3.6

Sugar Quantity 5

When entered the machine dispenses five portions of sugar

1.9.7.3.3.7

Sugar Quantity 6

When entered the machine dispenses six portions of sugar

1.9.7.4 Test coffee

(for ROSSO)

Testing the functioning of espresso group

1.9.7.4.1 Open group

When entered the espresso group is opened in initial state to grind coffee

1.9.7.4.2 Close group

When entered it closes the espresso group in coffee making state

1.9.7.4.3 Test grinder

When entered it turns ON the coffee grinder for 0.5 seconds provided that the

dosing apparatus is not full

1.9.7.4.4 Test doser

When entered it opens the dosing apparatus twice (if it contains ground coffee, it

is dropped into the nozzle)

1.9.7.4.5 Test coffee powder When entered it passes ground coffee into the nozzle

1.9.7.5 Test cup

Check the cup dispensing mechanism

1.9.7.5.1 Cup arm in

When entered it turns the arm with the cup inside the machine (in drink preparation

mode)

1.9.7.5.2 Cup arm out

When entered it turns the arm with the cup out of the machine (in drink dispensing

position)

1.9.7.5.3 Dispense cup When entered it dispenses the cup into the holder from the cup dispenser

1.9.7.6 Test Sol.Selector

Test selector’s functioning

1.9.7.6.1

Reset position

When entered it shifts the selector into zero position

1.9.7.6.2 Soluble 1

When entered it shifts the selector into position 1 of instant drinks

1.9.7.6.3 Soluble 2

When entered it shifts the selector into position 2 of instant drinks

1.9.7.6.4 Soluble 3

When entered it shifts the selector into position 3 of instant drinks

Summary of Contents for ROSSO

























































































Search results

Summary of Contents for ROSSO

Reviews:

Related manuals for ROSSO

Brands by name

Popular brands

Unicum ROSSO, User Manual

Search results

Summary of Contents for ROSSO

Reviews:

Related manuals for ROSSO

Brands by name

Popular brands