Unicum ROSSO User Manual Download Page 9

Page: 9 / 88

ROSSO / ROSSO INSTANT

Page 9

Version 3.3 / November 2016

ТМ

•

Regularly clean the vending machine, to adhere to the hygienic safety rules.

•

Please only use washing materials, permitted for use in food preparation areas, to clean the

vending machine’s body.

•

Make sure that the vending machine is OFF before starting technical service or repair.

•

It is strictly prohibited to cover the vending machine with fabric or any other such material.

• Each vending machine is identified by the serial number inscribed on the specification plate,

which is fitted on the rear wall of the machine. The specification plates carries all the technical

details of the machine.

ATTENTION: The vending machine dispenses hot drinks! The front flap of the dispensing slot

should be closed during the preparation of the drinks to avoid burning hands or other parts of

body! Please do not open the front flap before the drink is ready for dispensing!

ATTENTION: This vending machine only be used inside covered premises!

Summary of Contents for ROSSO

























































































Search results

Summary of Contents for ROSSO

Reviews:

Brands by name

Popular brands

Unicum ROSSO, User Manual

Search results

Summary of Contents for ROSSO

Reviews:

Brands by name

Popular brands