Unicum ROSSO User Manual Download Page 22

Page: 22 / 88

ROSSO / ROSSO INSTANT

Page 22

Version 3.3 / November 2016

ТМ

3.4.10 The hydraulic circuit (for ROSSO)

The water feed circuit has the following configuration:

When the vending machine is connected to the water supply, the water runs in through an electromag-

netic valve with filter (2), when using the bottles, the water from the bottle is pumped using a primary pump

(1). Then the water enters the float chamber (3) and running through the water filter (4), water meter (5)

and boiler feed pump (6) reaches the boiler (7), where it is heated to the set temperature level and accord-

ing to the selected drink option it then runs into one of the two boiler channels: either through the selector

(9) to the mixer or to the espresso group (8), where the water is mixed with the required ingredient and the

drink is dispensed to the customer through the outlet nozzles (11). The excess of water and drink are then

discharged into the waste container (12).

1. Feed pump (autonomous operations)

2. Electromagnetic valve (water supply line)

3. Float chamber

Water filter

5. Water consumption meter

6. Boiler feed pump

7. Boiler

8. Espresso group

9. Water selector

10. Mixers

11. Drink outlet (discharge) nozzles

12. Waste container

Summary of Contents for ROSSO

























































































Search results

Summary of Contents for ROSSO

Reviews:

Related manuals for ROSSO

Brands by name

Popular brands

Unicum ROSSO, User Manual

Search results

Summary of Contents for ROSSO

Reviews:

Related manuals for ROSSO

Brands by name

Popular brands