Page 32
Version 3.3 / November 2016
Figure 65 (description):
1. Lid on mixer’s inlet
2. Mixer’s motor
3. Mixer’s funnel
4. Adapter for drink dispensing pipe
5.
Mixer funnel fixator
6. Exhaust hole gasket
Figure 65
1.
Disconnect the drink dispensing pipe (see figure 66)
2.
Turn the handle on the funnel fixator downwards (see figure 67)
3.
Carefully pull out the funnel (see figure 68 and 69)
For installation perform the same steps in reverse order.
To remove the mixer’s motor, loosen the screw, which holds the mixer to the bracket (see figure 69), and
remove the motor. After that disconnect the power connector.
Figure 68
Figure 69
Figure 66
Figure 67
1
2
3
4
5
6
When needed you should remove the funnel and other plastic
parts of the mixer, for planned cleaning and perform the actions in the
following order:
