Page 79
Version 3.3 / November 2016
4.2.3 Menu item ‘‘2.3 SNACK 1’’
Menu item “2.3 Snack 1” is designed for maintenance and monitoring of SLAVE - Machine’s main parameters.
This menu item is hidden if s.c. “1.1.12 Snack number” = 0.
When you connect a second vending machine snacks in s.c. ‘‘1.1.12 Snack number’’, set = 2.
Then select s.p. ‘‘2.4 Snack 2’’ and make check and control similary s.c. ‘‘Snack 1’’.
Sub-menu
Description
2.3 Snack 1
Testing and monitoring of vending machine’s main features
2.3.1 Automatic
Upon entry all motors are reset to initial state, as well as unblocking of all blocked
spirals is performed (which were blocked after failure). It is MANDATORY to select
this menu item before each Machine servicing and zero position adjusting.
2.3.2 Test all
On entry tests all cells
2.3.3 Test motor
Enter cell number.
When you enter, a test sale is executed from the given cell
2.3.4 Temperature
Shows temperature readings from all three sensors of FOODBOX
2.3.5 Voltage DC
Shows the Voltage reading from the power supply circuit (normal value when on
220V – 29.8V)
2.3.6 Lift voltage DC
(not used)
In this software version the menu item is shown, but has no parameters
2.3.7 Lift (not used)
This menu item is shown but not used
2.3.8 Test input
Testing the Machine’s sensors
2.3.8.1 Optical sensor
Shows the state of optical sensors
2.3.8.2 Door
Shows the state of door’s sensor
2.3.8.3 Tilt
Shows the state of impact/tilt sensor
2.3.9 Test siren
For the SLAVE machines item is not used
2.3.10 Keyboard test
Testing the keypad – shows the result of each key press on the Machine’s LCD
