Page 16
Version 3.3 / November 2016
The drinks dispensing tray is placed on a swinging bracket.
The dispensers for cups, spoons and sugar container are all situat-
ed above the drinks dispensing tray.
The drinks dispensing tray includes the following components (see
figure 17):
1.
Cup, sugar and spoon dispensing slot
2.
Optic sensors (optional)
3.
Turning handle to displace the cup (cup movement)
Figure 17
b. Door
The vending machine’s door is equipped with money intake
and change dispensing devices, indicators, drinks selection
buttons, change dispensing button, sugar level adjustment
button, light panel and drinks dispensing slot (see figure 19).
1. Door to the electronic circuitry section
2. Upper light-box cover
3. The keyboard short cut
4. Drinks selection keypad – label placement slot (back side)
5. Electronic circuitry section door latch
6. Drinks dispensing slot (back side)
7. Lock mechanism
8. Bank note acceptor (BNA)
9. Main Board (controller)
10. Modem (optional)
11. Coin slot with change dispensing function
12. Coin box (cash box)
Figure 18
1
2
3
The power supply and the power supply circuit are located on the
rear wall of the body behind the containers with ingredients.
с. Power supply (1), power circuit (2)
To access the power supply section,
please remove the ingredient con-
tainers and loosening the screws,
remove the protective panel.
The extension block with multiple
sockets (3), used to connect acces-
sories (printer, speakers) is located
on the top end (optional)
Figure 19
1
2
3
1
2
3
4
5
6
7
8
9
10
11
12
