AP401FULL- HD_rev. 09_UK
52
Note: In order to use the remote control software, the instrument must have the
following RS232 configuration:
1.
baud rate = 38400 bps
2.
data bits = 8
3.
parity = none
4.
stop bits = 1
5.
Flow control = Xon / Xoff
12.2.
User Program Setup
This section allows for the creation, management, digital storage and transmission of
various user program groups to the instrument (a program group is called a “
plan
”). Each
plan, identified with a name, can contain up to a maximum of 100 programs.
Figure 3:
Example of parameter settings for an analogue terrestrial channel
Frequency
Terrestrial Options
Channel
Country
Channel
Digital
Plan name
Progr. name
User. progr. posit.
User Program Setup