AP401FULL-HD_rev.09_UK
33
•
the level of the highest analogue channel found during the search.
•
the power of the most powerful digital channel found during the search.
•
a table containing the progressive number, the channel, the channel type and the
measured level for each search result.
Press the
MENU
button. The submenus for configuring the search methods will appear on
the right hand side of the screen:
•
Start: starts the search. All of the boxes disappear and the box labelled STOP
appears which, if selected, interrupts the search and displays the channels found up
until that time.
•
Channels: modifies the search criteria: only analogue channels, only digital channels,
or both types.
•
Min Anl Lev: the minimum search level setting for analogue channels. This value can
be inserted using either the numeric keyboard or else the shaft encoder in
increments of 1 dBuV.
•
Min Dig Pow: similar to Min Anl Lev, but for digital channels.
•
Exit: exits the function.
The same function can be also be activated by holding down the
CH
button for a few
seconds and then selecting the SEARCH CHANNELS item from the submenu.
⇒
2nd+NG:
pressing this button combination enables and disables the noise
generator.
⇒
2nd+22K:
allows for the activation and deactivation of the 22KHz tone.
⇒
2nd+TP SAT:
provides for quick access to the settings menu for tuning the
satellite transponders.
4.18.
MENU CH (CHANNEL)
Press hold CH key for open the channel menu with follows options:
4.18.1.
CHANNEL TABLE
It supplies the list of canalizations for match the channels of terrestrial signal with
frequencies of each Country.
4.18.2.
SEARCH CHANNEL
It supplies the list of terrestrial channels in TV signal with specifications of type of signal
(analogue or digital) and measure of level.
CHANNEL TABLE
Channel Table
Search Channel
LTE
