AP401FULL- HD_rev. 09_UK
10
Display Characteristics
Viewing area
5.7 ” (Diagonal).
Resolution
320 (L) x 240 (H) pixels.
Contrast Ratio
300:1
Brightness
400 cd/m
2
.
Surface Treatment
Anti-Reflection and Hard-coating (>2H).
Viewing Angle
±55 ° (L), -30/+60 ° (H).
Backlighting
LCD.
Reception standards
All colour PAL, SECAM and NTSC encodings.
Functions
The screen is capable of displaying:
1)
Full screen TV picture.
2)
Partial screen TV picture – analogue indication of the relative
level with luminous horizontal band and horizontal TV
synch. pulse waveform
3)
Full frequency spectrum with two markers.
4)
Partial frequency spectrum (SPAN) with two markers.
5)
Video monitor (through SCART connector).
6)
Menus and submenus.
Video polarity
Automatic positive or negative, based on the reception
standard (selectable in SAT band).
Audio characteristics
Demodulators
Selectable for TV - AM - FM modulated signals.
Frequency subcarriers
1)
Automatically selected for the VHF/UHF frequency range
based on the TV standard.
2)
Adjustable for the SAT frequency range, in increments of 10
kHz from 5 MHz to 9.77 MHz, by means of PLL frequency
synthesis.
De-emphasis
Selectable in 4 steps (only for the SAT frequency range): flat -
J17- 50µS - 75 µS.
Modulation frequency
deviation
Selectable in 4 steps. (Only for the SAT frequency range):
narrow, medium, wide and extra wide, corresponding to
bandwidths from 140 to 400 kHz approx.
Loudspeaker
70 mm., Magnetodynamic
Output power
Continuously adjustable up to a maximum of 0.2 W.
Auxiliary inputs and outputs
SCART connector
(complete)
Audio and video in/out (1V /75
Ω
- 0.3V/600
Ω
) – RGB input.
RGB output for all functions shown on the LCD.
HDMI
Digital audio and video output
RS 232 serial e USB
ports
for PC data exchange
