AP401FULL-HD_rev.09_UK
31
Turn the
DIAL
to highlight the desired plan and press
ENTER
.
For each of the five
plans, a menu will appear which allows for the following actions to be carried
out:
•
RF LOG: select this item to change the settings for logging the optical measurements
and the measurements of the optical signals converted into RF.
•
START LOGGER: starts the logging of the measurements based on the plan’s
settings.
•
DISPLAY DATA: displays the results of the data logging.
•
CLEAR DATA: clears the relative plan’s log data from the memory.
•
DISPLAY PLAN: allows for the selected plan’s settings to be displayed.
After having selected this function, the following function boxes will appear on the
right hand side of the screen when the MENU button is pressed:
EDIT: allows the user to access the functions for editing the selected plan. Turn the
DIAL
to move the cursor to the part of the plan to be modified or filled out (if
blank). Press the
MENU
button to enable the modification of the value. Use the
DIAL
to select the desired value.
CLEAR: When this box is selected, press the
ENTER
button to clear the contents of
the selected item.
STATUS: When this box is configured, the
ENTER
button can be pressed to choose
the method for selecting the on or off status for the positions in the plan, as indicted
below:
ALL: sets all the positions to
on
.
NONE: sets all the positions to
off
.
ONE BY ONE: allows for the status to be set for each individual position.
START LOGGER: when this box is selected, press the
ENTER
button to start the data
logging session.
•
EDIT PLAN NAME: this function allows the name of the plan to be edited.
•
CLEAR PLAN: When this box is selected, press the
ENTER
button to clear all the
positions of the selected plan.
•
RS232 PRMT:
selecting this menu item will open a window that allows for the serial
port’s parameters to be displayed and configured:
•
BAUD RATE: indicates the communication speed.
•
BIT FORMAT: indicates the communication format.
•
PARITY: indicates the parity check setting
•
HANDSHAKE: this control can be set to either
ON
or
OFF
To modify the setting, turn the
DIAL
to select the desired item and press
ENTER
to
confirm the selection.
Turn the
DIAL
again to modify the set value and press
ENTER
to confirm the selection.