Ultrak JPD-101, User Manual

Page: 113 / 144

518007-3960-F 4-19 KEMU040019
April 25, 2001
2. Plug the slave controller into the DATA IN on one of the DIA-02's.
Plug the master controller into the DATA IN on the other DIA-02.
3. Using RS-422 1-twisted pair shielded cable (P/N 849518-0334)
connect the terminals on the DATA IN side of the DIA-02 that the
master controller is plugged into to the COMM connector on the
rear panel of the switcher. Plug the other end into the telephone
jack on the front panel of the CATS Video Switcher.
DIA-02 CATS VIDEO SWITCHER
DATA IN SIDE COMM CONNECTOR
Black, TX+ Pin 10, Data +
Red, TX- Pin 6, Data-
4. The COMM connector on the rear panel of the CATS Video
Switcher has 4 output ports for connection to the
FastScan/SmartScan units. Refer to the CATS Video Switcher
User's Manual (M/N 517462-1960) for connection to the
FastScan/SmartScan domes.
4.4 INSTALLATION DRAWINGS
The following drawings may be used as a reference before performing a system-
level installation.
Title Page
JPD-101 Controller Unit Installation (D/N 517057-2430) ...................4-20
DIA-01 Control Interface Adapter (D/N 515558-2430) .......................4-21
DIA-01/X Control Interface Adapter (D/N 515558-4430)....................4-22
DIA-02 Control Interface Adapter (D/N 517172-1430) .......................4-23
DIA-02/X Control Interface Adapter (D/N 517172-3430)....................4-24