Ultrak JPD-101, User Manual

Page: 88 / 144

518007-3960-F 3-12 KEMU040019
April 25, 2001
K#n/#n Modify
M I D
The text to the right of the Key#n/#n describes the letter the cursor is
on.
M = Modify
I = Insert (Insert an action above the action the cursor is on)
D = Delete (Delete the action the cursor is on)
6) Scroll through the actions by pushing the small joystick up or down until
the desired action to be modified appears on the display. If an action
has been programmed, the second line of the display describes the
programmed action.
7) When the desired action is displayed, move the cursor to M (modify)
and push the small joystick up or down.
8) Select the desired new function. Enter the information as prompted on
the JPD-101 display. Refer to action 5 in paragraph 3.2.1 for
programming procedures for the functions.
9) When done modifying a function key, exit the programming mode by
executing the Exit menu option for each display until the message
DONE appears on the JPD-101 display. To execute the Exit option in a
menu move the small joystick left or right until Exit is highlighted; then
move the small joystick up or down. Refer to paragraph 3.2.6.