Ultrak JPD-101, User Manual

Page: 32 / 144

SET ADDRESS IN KD6 Z-SERIES
518007-3960-F 2-14 KEMU040019
April 25, 2001
2.2.2 Setting the Address in the KD6 Z-Series Dome
To set the address of a KD6 Z-Series Dome, you must know the serial
number. The serial number is eight (8) digits and can be located on the KD6
Z-Series Dome pan and tilt unit. Note: all other dome addresses are set
using rotary switches or a DIP switch on the receiver board.
Press OPT to view the LCD menu options OPT
Press 1 (MISC) 1
Press 2 (SET ADD) to set the address 2
Enter the Serial Number (8 digits)
of the KD6 Z-Series (SN-). Enter the leading SN#
character A of the serial number as a 0.
Press Enter . Enter
Enter the desired address of the dome ( 1-250 ) ###
Press Enter Enter
The LCD displays the message, “Updating Address”.
The address is the camera number the operator uses to call-up and control
the dome.