Ultrak JPD-101, User Manual

Page: 25 / 144

LCD DISPLAY
NUMERIC KEYPAD
518007-3960-F 2-7 KEMU040019
April 25, 2001
3 LCD DISPLAY
The display is a 2X20 EL back light super twist LCD. The viewing angle of the
display may be changed by turning the screwdriver adjustment on the back panel
(see figure 2-2). The first line of the display indicates the primary monitor
(number) and camera (number) the hand controller unit is controlling. The
second line indicates the secondary camera (number) and monitor (number), if
one is selected.
The second line of the display shows each keystroke as it is entered. Any input
errors may be corrected by pressing the CLEAR key and re-entering the data.
All messages and prompts are also displayed on the second line. The display
blinks at various data entry points to indicate more data needs to be entered or a
key pressed to complete a command. The controller returns to the secondary
camera/monitor when done displaying messages or prompts.
The language is selectable (English, Spanish, German, and French) for
displaying the messages and prompts on the LCD display.
4 NUMERIC KEYPAD
The numeric keypad is used to enter camera numbers, monitor numbers,
PreShot numbers, VectorScan numbers, etc. The CLEAR key is used to clear
data entries or the second camera and monitor. The ENTER key is used to
complete a data or function entry.