Ultrak JPD-101, User Manual

Page: 26 / 144

FUNCTION KEYPAD
518007-3960-F 2-8 KEMU040019
April 25, 2001
5 FUNCTION KEYPAD
The function keypad is used in conjunction with the numeric keypad to carry out
the control functions of the FastScan and SmartScan assemblies and CATS
Video Switcher.
- Camera/Monitor Switching (CAM, MON, ENTER, CNTL) - up to 250 cameras
to 32 monitors
- Manual/Auto Iris Control (IRIS) - if MIO-100 option is installed in FastScan or
SmartScan receiver unit. Manual/auto iris always available in SmartScan Pro
II, SmartScan III, KD6 UltraDome and KD6 Z-Series Dome units.
- Auxiliary Output Control (AUX) - if used with CATS video switcher, AIF-
100/CO, CRX-800 or CRX-801 Control Receivers, or CRX-500 Series Control
Receivers
- Program “Quick” PreShots
- PreShot Call-up (PSHOT)
- PreShot Listing (OPT)
- Run VectorScan (VSCAN)
- Program VectorScans 1-3 in the KD6 Z-Series Dome
- VectorScan Listing (OPT)
- Sector Listing (OPT)
- Controller Diagnostics (OPT)
- SmartScan Functions (OPT) - find home, manual control
- Enable/Disable Camera ID Display, Coordinate Display or Error Log Display
(OPT)
- CATS Monitor Sequence Control (SEQ)
- Select LCD Display Language (OPT)
- Set KD6 Z-Series Dome Address (OPT)
- Program and Run Tours (OPT)
- Freeze and Unfreeze video in the KD6 Dome (OPT)
- Invoke the flashback function in the KD6 Dome (OPT)
The MCALL and ALARM keys are not functional on the JPD-101 Controllers.