Ultrak JPD-101, User Manual

Page: 27 / 144

FUNCTION KEYS 1-8
518007-3960-F 2-9 KEMU040019
April 25, 2001
6 FUNCTION KEYS 1-8
Function keys 1 through 8 are programmable using the two 12-key keypads and
the small joystick. These keys can be programmed to perform a single action or
up to eight actions simultaneously. If the operator does not want the actions to
occur simultaneously, a delay time (wait) can be inserted as an action between
actions. The actions that can be programmed are PreShots, VectorScans, video
switching, and auxiliary control (video recording).
Pressing the function key starts the action(s) programmed. Pressing the key
again stops the action(s). If the key is not programmed, nothing happens when
the key is pressed.
NOTE
If a VectorScan is started when a function key
is pressed, the VectorScan continues to run
until manual control of the camera, where the
VectorScan is running, is taken. Pressing the
function key does not halt a VectorScan.
Function keys 5, 6, and 7 can also be set to run tours 1, 2, and 3, respectively.
Function key 4 can be set to invoke the flashback function. Function key 8 can
also be set to enable and disable the freeze frame feature in the KD6 UltraDome.
Refer to paragraphs 2.2.14 and 2.2.15.