Ulead MEDIASTUDIO PRO 7, User Manual

Page: 70 / 436

MEDIASTUDIO PRO USER GUIDE 70
2.
Select the main logo and click the Moving Path tool. (It is best to do
these procedures in Wireframe mode to speed up the editing pro-
cess.)
Note: All moving path actions must be done with the Moving Path tool selected.
Do not switch tools during this procedure.
3.
Select the Start key frame in the Time Control panel and, clicking the
Resize button on the Attribute toolbar, enter 580 in the Width spin
box. (Click the Keep Aspect Ratio button to ensure the height changes
proportionally.) After resizing, drag on the object to position the letter
CG in the middle of the edit window frame.
4.
Go to the last frame and click the Add Key frame button and then
drag the key frame back to the 2 second mark.
5.
Click the Resize button on the Attribute toolbar and enter 68 in the
Width spin box. (Click the Keep Aspect Ratio button to ensure the
height changes proportionally.) After resizing, position the object in the
center of the edit window frame.
6.
Click on the letter A and then click on the Start key frame in the
Time Control panel.
7.
Drag the transparency control point to the top of the transparency
graph and then move the slider to the 2 second mark and add another
key frame. Then, at 7 frame mark, add another key frame. For this key
frame, set the transparency to 0% by dragging the transparency point
to the bottom of the transparency graph.
8.
Repeat the same process for the title text, except start the fade in at the
3 second mark, finish at the 4 second mark.
9.
Select the text at the bottom of the logo and set it to appear at the
00:04:07 (without a fade effect). To do this, place a key frame at the
00:04:06 mark, and then another at the 00:04:07 mark and then change
the transparency accordingly.
Performing a fade and distortion over time