Ulead MEDIASTUDIO PRO 7, User Manual

Page: 339 / 436

CG INFINITY: CHAPTER TWO 339
To change the end time of a moving object:
1.
Select the object you want to change with the Moving Path tool. The
moving path of the object appears.
2.
Move the Preview slider to the last frame in the Time Control Panel,
the object moves to that position on the moving path. Then click the
Add Key frame button. A key frame is added to the Key frame slider.
3.
Drag on the key frame and move it to the position where you want the
movement of the object to end.
4.
Move the Preview slider to the start or click on the Start Key frame
to return the object back to its beginning position.
5.
Click the Play button to see the motion of the object.
Performing minor adjustments in time
After laying out all your objects and specifying their various moving paths,
you may find that you need to go back and adjust the timing of a particular
object by a few frames, but don’t want to affect its position on the
moving path. To do this, select the key frame belonging to the object and
then move the key frame along the Key frame slider (not the object
itself). This increases or decreases the timing before the object begins or
continues its movement.