power supply to the robotic arm.
【Shutdown】
●
Click this button, the page will go back to the【Search the IP Address
of the Control Box】 page, and the robot controller will shut down. This
operation is equivalent to long pressing the Power button of the robot
controller, and the shutdown process takes 2 to 3 seconds.
【Reboot】
●
Click this button, the robot controller will restart. After the restart
action is completed, the pop-up window will close and the robotic arm
will be automatically reconnected. The operation is equivalent to the
shutdown and startup process of the control box, and restart process
takes 3 to 4 minutes.
Note: The 【Shutdown】 and【Reboot】buttons do not affect the main power
supply of the robot and the power supply of the robotic arm.
1.4.10.2
Software / Firmware Update
When updating software and firmware, make sure that the local area
network where the computer and the robot are located can communicate with
