the external network. In addition, make sure the control box can
communicate with external internet.
: Click this button to check whether the control box is
connected to the Internet.
Note:
Note: For detailed steps on updating UFACTORY Studio and firmware, please
refer to Appendix 4-Lite6 Software/Firmware Update Method.
1.4.10.3
Network Settings
The IP address, subnet mask, broadcast address, and default gateway of
the robot are displayed on this page. You can change the IP address of
the control box and add DNS.
Note:
If you change the IP address, be sure to mark it on the control box. If
you forget or lose the modified IP address, you can use the following
method to reset the IP.
Reset IP
Steps to reset IP:
