Page 74
Fig. 2
2.
Press the OPEN key to open the printer cover as shown (see Fig. 3/1).
Handle the paper cutter carefully not to cut your hand.
3.
Place the paper roll making sure it unrolls in the proper direction as
shown (see Fig. 3/2).
4.
Take out the paper and re-close the cover as shown (see Fig. 3/3) the
printer cover is locked.
5.
Tear off the exceeding paper using the jagged edge (see Fig. 3/4).
Fig. 3
6.
Close the printer's cover door (1) by pulling it down, with the tip end of
the paper emerging from the slot (2) (see Fig. 2).
Summary of Contents for LabSci 11-V
