Page 71
removal
A 00:00:04
046.5
100.0
The time, temperature, and pressure during Air
removal
TIME
°C
kPa
Ster Time:
4.0min
Sterilization time for selected program
Ster Temp:
134.0°C
Sterilization temperature in chamber for selected
program
Cycle:
Unwrapped
instru
Cycle name
Cycle Num:
000001
Cycle number
Version:
7.0.00.00
Software version A.B.CC.DD = 7.0.00.00
A: Door Type: Single motor = 7
B: Vacuum Type = 0
C: Total number of Input/Output functionality that
are not as default = 00
D: Total number of parameters values that are not
as default = 00
Model:
LABSCI 11LV
Model name
Ser. Num:
000000000001 Model Serial number
Time:
11:50:05
Time sterilization cycle started
Date:
9/FEB/2010
Date sterilization cycle started
-----------------------
Time:
08:51:39
Time of turning on
Date:
9/FEB/2010
Date of turning on
POWER ON
The device is turned on
Time:
00:00:00
Time of turning off
Date:
9/FEB/2010
Date of turning off
POWER OFF
The device is turned off
Legend
A
Air removal stage (Steam flash)
E
Exhaust stage
H
Heating stage
S
Sterilization stage
CLK 1
Real Time Clock
C
Cooling stage (for C only)
CLK 2
Software clock
Summary of Contents for LabSci 11-V
