Unpacking and Setting Up
2-5
To Aerosol Inlet on
Instrument
Union Fitting
Aerosol In
Removable Base
Connect
Cyclone to
Union Fitting
Figure 2-2
Cyclone Assembly
Connecting Power
1. Connect the supplied power cord to the receptacle at the back of the
instrument. The cord has been supplied with the appropriate connector
for your country. Supply voltage can be 100 to 240 VAC and 50 or
60 Hz.
2. The instrument on-off switch is located above the power cable
connection on the instrument.
Notes
: Make certain the line cord is plugged into a grounded (earth
grounded) power outlet. Position the instrument so the power
cord connector is not blocked and is easily accessible.
The internal power supply contains no user-serviceable parts.
If the power supply is not operating correctly, use the
information in the troubleshooting section to contact TSI. This
instrument should not be used in a manner not specified by the
manufacturer.
Connecting the Computer
1. Locate the serial cable supplied with the Model 3090. Connect one end
of the cable to y
our computer’s serial interface port (COM 1, COM2, or
other if available). If you have a USB port only, use the adapter cable
(1102125) supplied in the accessory kit.
2. Connect the other end of the cable to the serial connection at the back
of the EEPS spectrometer.