Software Operation
5-13
Figure 5-8
Use the Mouse to Directly View Data Values
D e l e t e D a t a
To redo a run or delete data for a run just taken, on the toolbar select
Run|Delete
or
. A verification message is displayed.
You can only delete data for the run you just collected. Once you close this
file, you cannot delete the data from this file using this method the next
time this file is opened using
File|Open
or
. If you need to delete a
saved file, use a tool such as Explorer to delete the file.
Z o o m I n a n d O u t o n D a t a i n a G r a p h
Zoom in on data displayed in a graph as follows:
1. Use the mouse to position the cursor (pointer) on the graph surface, at
one corner of the graph area you want enlarged.
2. Press down on the left mouse button and drag the mouse to the
opposite corner of the data you want enlarged.
3. Release the left mouse button. The area you selected is enlarged.
4. Continue to zoom further by repeating steps 1 through 3.
To unzoom, select <
Z
> or
Format|Undo Zoom
or
on the toolbar. The
enlarged area is returned to normal view.
