TS Industrie Super Premium 30ER Technical Manual Download Page 51

Page: 51 / 76

Super Premium 30ER / 35DR / 35DRI

23/01/2014

Description et manipulation

NoStress rotor settings selected

Press the

↓

↑

buttons once or twice

at any time to visualise the rotor settings for

the selected NoStress option:

Example option

below:

Minimum RPM

: below 1875 rpm the feed roller stops.

Return RPM

: from 2175 rpm, the feed roller starts to turn.

Normal RPM

: after over-speed of the engine or rotor (PTO), the rotor must return

to less than 2175 rpm in order that the feed roller can function again.

RPM overspe

: feed roller stops.

REMINDER:

It is formally forbidden to modify the default factory settings of the Pilot System. Any
modification to the security and program parameters made outside of our factories is

the entire responsibility of the person having made these changes.

Summary of Contents for Super Premium 30ER













































































Search results

Summary of Contents for Super Premium 30ER

Reviews:

Related manuals for Super Premium 30ER

Brands by name

Popular brands

TS Industrie Super Premium 30ER, Technical Manual

Search results

Summary of Contents for Super Premium 30ER

Reviews:

Related manuals for Super Premium 30ER

Brands by name

Popular brands