TS Industrie Super Premium 30ER, Technical Manual

Page: 33 / 76

Super Premium 30ER / 35DR / 35DRI
33
23/01/2014
DISMANTLING TO CONTROL THE COUNTER-BLADE
Imperatively remove the ignition key for this type of servicing
-Remove the two attachment bolts diam.12 (
1
) as well as the two safety bolts (
2
) diam.8 at
each end of the counter-knife.
-Drive it out by sliding it in its housing on either side. If the edge is worn out; completely
remove the counter-knife from its housing, and remount it by shifting it a quarter turn so as
to show a new edge facing the knives.
(Each of the counter-blade’s four edges can be used)
-Reinsert the two bolts
( 1 ) and ( 2 ) .
M A I N T E N A N C E