TS Industrie Super Premium 30ER Technical Manual Download Page 45

Page: 45 / 76

Super Premium 30ER / 35DR / 35DRI

23/01/2014

Description et manipulation

As with the

VarioStress

, the

Pilot System

has 3 settings.

Above each button is a liquid crystal picto-
gram representing the setting.

Button 1

for branch waste:

uses a wider engine RPM.

Button 2

for leafy waste: uses an interme-

diate RPM. Can be used for branch waste
and small amounts of conifer/vegetation.

Button 3

for conifer and large quantities of

vegetation (particularly wet and green
wood): restricted but high regime for maxi-
mum ventilation.

Choice of NoStress setting

If the programme settings are changed during use, the yellow forward button
must be pressed to reengage the feed rollers.

Summary of Contents for Super Premium 30ER













































































Search results

Summary of Contents for Super Premium 30ER

Reviews:

Related manuals for Super Premium 30ER

Brands by name

Popular brands

TS Industrie Super Premium 30ER, Technical Manual

Search results

Summary of Contents for Super Premium 30ER

Reviews:

Related manuals for Super Premium 30ER

Brands by name

Popular brands