TS Industrie Super Premium 30ER, Technical Manual

Page: 36 / 76

Super Premium 30ER / 35DR / 35DRI
36
23/01/2014
SETTING THE METALLIC BELT’S TENSION
Belt correctly tightened
Belt loose
To tighten the belt loosen the 4 screws
on either side rep. (
A
) and simultaneously tighten the tightener rep . (
B
) so that the belt
is parallel to the unit’s base (see photo 1). Retighten the screws
( A ). After tension, run
the belt several times in forward and reverse directions to make sure it remains in line.
(Before tension make sure the belt is well centred in the hopper)
1
2
3
For good belt engagement, check
its tension after 8h and regularly
afterwards.
3
M A I N T E N A N C E
2 1
Rem.: do not tighten too much, a good grip of the feed roll
and belt does not require excessive tension.