TS Industrie Super Premium 30ER, Technical Manual

Page: 58 / 76

Super Premium 30ER / 35DR / 35DRI
58
23/01/2014
Using the machine with the CO ² reduction:
-Start the engine and heat
Gear handle high, idle
- Remain push 1 second on the yellow button ( forward feed rol-
ler ), engine accelerate, CO² reduction system and feed roller ad-
vance are now activate , you could release the button & start to
work.
-The engine will remain accelerate until the worker being at the
back the feeding hopper.
If it’s move away from the machine, the engine will return to the
idle after a laps time defined by the coil coder button position.
The engine will accelerate automatically when the worker will be
detectected again at the back the feeding hopper.
To switch off the CO² Reduction system, push 1 second on the
black button ( backward feed roller ).
The engine will return to the idle.
Using the machine without the CO ² reduction:
-Start the engine and heat few minutes.
- Accelerate the engine to maximum speed with the gear handle.
- Order the forward & backward operations ( feed roller & belt )
to push normaly & briefy on the yellow & black button.
Presence detector
D E S C R I P T I O N A N D
M A N I P U L A T I O N
The presence detector at the back of the housing detects the
operator up to 2 m (6,5 foot) behind the hopper with a width
of approximately 0,80 m (2,6 foot). The hopper area is a dead
zone that is not taken into consideration by the detector. Ob-
jects in this area will not accelerate the diesel engine or the
rotation of the feed belt/roll.
All objects, even inert ones, e.g. a wall or a vehicle at less
than 2 m behind the chipper will generate the automatic ac-
celeration of the engine.