TS Industrie Super Premium 30ER, Technical Manual

Page: 25 / 76

Super Premium 30ER / 35DR / 35DRI
25
23/01/2014
# of hours Servicing
Daily
-Check engine’s oil level
-Check air filter’s cleanliness
-Check cleanliness of engine’s air cooling circuit
cylinder’s air intake grid (petrol model)
-Check cleanliness of engine radiator’s honeycomb (diesel model)
Every 10
-
Check tension of rotor’s transmission belts
(ER and DR see p.34 )
Every 50
-Tightening control of the two nuts of articulation of the coupling
head
-
Check tension of rotor’s transmission belts
( DRI see p.35 )
-Check tension of rotor’s transmission belts (DRI)
-Lubrication of the feed roller bearings
-Check of knives and hammers
-Check and remove the branches winding around the bearings' axes and
the hydraulic motors
-Check metallic belt’s tension (the first time at 8h)
Every 150
-Lubrication guide rails feed roller
-Check of counter-blade wea
-Lubrication of feed roller’s rotation
-Lubrication of the metallic belt’s forward and reverse rollers
-Replacement of hydraulic oil filter the first time and afterward every
500 hours (or every 2 years)
Every 200
-Verification wear rings hammers
Every 300
-Check of belt and slide plate wear
-Check battery’s electrolyte level
Every 500
-Replacement wear rings hammers
-Change hydraulic oil (or every 2 years)
-Chance hydraulic return oil filter (or every 2 years)
-Change hydraulic oil suction strainer (see page 39)
MAINTENANCE PERIODICITY
For further information concerning the maintenance of petrol or diesel engines;
please refer to the engine manufacturer’s manual that comes with the machine.
M A I N T E N A N C E