TS Industrie Saelen GS/VIPER50DS, Operating Manual

Page: 33 / 66

GS/ VIPER 50DS
DISASSEMBLY TO CONTROL THE COUNTER-BLADE
Imperatively remove the ignition key for this type of servicing.
-
Remove the two attachment screws (
1
) at each end of the counter knife.
-Remove the two safety bolts
(
2
)
-Drive the knife out by sliding it in its housing on either side. If the edge is worn out remove
the wheel and the mudguard; take the counter-knife out of its housing, and remount it by
shifting it by a half turn so as to show a new edge facing the knives.
(The counter-knife can be taken out on the right or on the left side)
(Each of the counter-knife’s four edges that can be used)
M A I N T E N A N C E