TS Industrie Saelen GS/VIPER50DS, Operating Manual

Page: 47 / 66

GS/ VIPER 50DS
In order to avoid these inconveniences and in view
of the environemnt, every time the operator leaves
the chipper the CO2 REDUCTION system will
automatically switch the engine to idle after a
certain amount of time. That will reduce the
nuisance considerably. As soon as the CO2
REDUCTION radar detects that the operator
approaches the hopper to put branches in it, the
engine returns to its maximum speed. At the same
time, the feed belt/roll starts to rotate again after
two seconds in order to resume chipping.
In addition to the mentioned environmental
advantages, the CO2 REDUCTION SYSTEM also
makes it possible to increase the life span of all
moving parts of the machine: diesel engine,
transmission, feed belt, feed roll, engines and
hydraulic circuits.
The chipper is a machine that is permanently
working at full engine speed. The periods of
chipping are alternated with passive idle
moments, the duration of which depends on the
configuration of the works. Hence, the noise,
the fuel consumption and the emission of CO2
are at maximum levels.
Functioning of the CO2
REDUCTION system (option)
D E S C R I P T I O N A N D
M A N I P U L A T I O N
See use on the following pages