TS Industrie Saelen GS/VIPER50DS, Operating Manual

Page: 7 / 66

GS/ VIPER 50DS
Safety instructions
This machine is only intended for crushing and shredding plants.
Besides shredding wood and plants , the VIPER shredder cannot be used
for any other purpose.
The shredder should only be used by people over 16 years of age.
This machine can only be used by someone who is in good physical condition and who
has some technical knowledge.
Maintenance and repair work should be done by a qualified technician. Assembling,
disassembling and/or specific maintenance work should be performed by an authorized
dealer.
Before beginning work or proceeding to maintenance of the VIPER , always remove the
ignition key.
Proceed to maintenance by scrupulously following the instructions.
Eliminate pieces of metal, plastic, rubber or any other materials that may have been mixed
with the wastes.
Always use protection goggles, work gloves and protection against noise;
The machine can in no case be used to transport equipment, material or people.
The machine cannot be used to push or pull anything.
Battery acid is very corrosive. Avoid any contact with the eyes, skin and garments.
Immediately rinse eventual splashes with water and if the case arises, consult a doctor.
Before touching the electric circuit, always disconnect the cable connected to the battery’s +
terminal.
Always keep the battery out of reach of children.
When performing maintenance, do it in a sufficiently lit workshop.
Respect the safety standards prescribed in the motor’s user and maintenance manual.
Keep children away while the machine is in operation or when performing maintenance
work; Do not work in confined space. Do not run the motor in a non ventilated place (risk of
CO² intoxication)
I N T R O D U C T I O N