TS Industrie Saelen GS/VIPER50DS, Operating Manual

Page: 19 / 66

GS/ VIPER 50DS
The VIPER is equipped with an electric command hydraulic distributor acti-
vated by ‘mushroom’ pushbuttons for the forward and reverse drives and a
red ‘hand rail’ command bar for stopping the feed roller / belt unit.
FORWARD RUN COMMAND
1 : To make the feed roller run in forward
drive the red handrail should be pulled back-
ward
2 : Press the yellow pushbutton to make the
feed roller run in forward drive
FEEDER STOP COMMAND
1 : Push the red handrail to stop the feed roll-
er.
(the handrail can be locked in pulled position
and in pushed position)
REVERSE RUN COMMAND
1
: To make the feed roller run in reverse
drive, first pull the handrail backward
2 : And press the black pushbutton
REM: the feeding cell can be switched di-
rectly from forward to backward opera-
tion and vice versa without using the op-
erating handle.
REM:
to make the feed roller / belt unit run in forward drive the en-
gine’s speed should be at its maximum
OPERATING OF FEEDER CONTROLS
G E N E R A L D E S C R I P T I O N
A N D O P E R AT I O N