TS Industrie Saelen GS/VIPER50DS, Operating Manual

Page: 31 / 66

GS/ VIPER 50DS
DISASSEMBLY FOR REPLACEMENT OF BLADES AND
HAMMER PELLETS
Imperatively remove the ignition key for this type of servicing.
-The hollow hexagonal screws of the blades and hammer inserts are mounted at the
manufacture without Loctite at a torque of 16 M. Kg (157 N.m). Use the appropriate
wrench that is in good condition to remove them.
-Open the chute as described on previous page.
-Remove the screws from blades and inserts. (For the assembly later on, only use the news
screws category 12.9 ).
-Clean the contact surfaces of the blades and the inserts clean at the base
(1) as well as the
wall (2) .
M A I N T E N A N C E