TS Industrie Saelen GS/VIPER50DS, Operating Manual

Page: 24 / 66

GS/ VIPER 50DS
MAINTENANCE PERIODICITY
# of hours Servicing
Daily
-Check engine’s oil level
-Check radiator’s water level
-Check air filter’s degree of clogging
-Check radiator’s degree of clogging
Every 15
-Lubrication of rotor’s hammers
Every 50
-
First engine oil change
-Lubrication of the rotor’s two rotations
-Cleanliness check of the air intake under the rotor
-Check if blades and hammers
-Check tension of rotor drive belts
-Lubrication of feed roller’s rotation
-Check level of hydraulics oil
-Check metallic belt’s tension (the first time at 8h)
Every 150
-Engine oil change (or once a year)
-Lubrication of the metallic belt’s forward and reverse rollers
-Lubrication of feeder articulation axis bearings
-Replacement of hydraulic oil filter
the first time and afterward
every 500 hours (or every 2 years)
-Check of counter-blade wear
-Check and remove the branches winding around the bearings'
axes and the hydraulic motors
-Check tightening of coupler head’s articulations
Every 300
-Replacement of gas-oil filter
-Check of belt and slide plate wear
-Check battery’s electrolyte level
-Check tension of alternator’s belt
-Check oil level of feed roller gearbox
Every 400
-1st coupler oil change , then every 1000 hours (or every 2
years)
Every 500
-Change hydraulic oil (or every 2 years)
-Chance hydraulic return oil filter (or every 2 years)
-Change hydraulic oil suction strainer
(see page 40)
-Change feed roller gearbox oil
M A I N T E N A N C E