Trox Technik EM-IP, Configuration Manual, Page: 75 / 80

6 Fault displays
6.1 LED status display
Fig. 55: LED fault display
Faults are first indicated by 4 LEDs on EM-IP.
The LEDs indicate the following:
Power LED (Fig. 55/2) Operating status
LED green Voltage is supplied
LED off No voltage is supplied
Status LED (Fig. 55/3) Operating status
LED green Reset button is being
pressed
LED green, blinking Normal operation
LED red/green, blinking DHCP mode is active
LED orange Boot phase of EM-IP
LED orange, blinking No configuration available
LED red All files are being closed,
then the module is
rebooted.
LAN 1/LAN 2 LED
(Fig. 55/1 und 4)
Operating status
LED green Connection to the network
LED green, blinking Data transmission in pro-
gress
6.2 Webserver
To display diagnosis options Ä Chapter 3.5.8 ‘Func-
tions of the ‘Help’ menu’ on page 25 , go to the menu
bar of the web server and then to ‘Help’ .
These functions are available to Admin only. Other
users cannot access this menu.
Fault displays
Webserver
Expansion module EM-IP 75