Triumph Adler LP 210, Instruction Handbook Manual

Page: 83 / 162

Working with the DOS printer tools 6
Laser Printer 200 Series 6-9
Specifying the paper source
Under “Paper source“ you can specify which tray will feed the printer.
* optional paper source unit
✎
Not all paper formats available?
If you have selected the optional paper feed tray 2 under “Paper feed“,
then not all the paper formats given in the table are available.
Specifying fast or normal printing modes
You can shorten the time before the first page of a job is printed.
➜ Select “Fast print“ to maintain the fusing unit at a high temperature.
This minimizes the time before the first page is printed.
➜ Select “Normal print“ to allow the fusing unit to cool down when
printing is not in progress. In order to print the first page of a print job,
the fusing unit must first warm up again and so more time is required
for the first page.
Specifying the number of lines printed per page
Enter the number of lines to be printed per page in the “Line/Page“ box.
Specifying the number of copies
In the “Copies“ box, specify the number of copies that you wish to print out.
You may enter any value between 1 and 999.
Paper source Description
Auto Printing paper is fed from all available trays
Tray 1 Printing paper is fed from tray 1
Tray 2* Printing paper is fed from tray 2
Manual feed Printing paper is fed into the printer through the manual
feed unit.
To feed paper manually, place a sheet in the input and
press the control button.