Triumph Adler LP 210 Instruction Handbook Manual Download Page 76

Page: 76 / 162

Working with the DOS printer tools

6-2

Laser Printer 200 Series

Switching on/off popup messages (Setup menu)

Faults are quickly signalled by means of popup messages. If the printer
malfunctions, a dialogue box containing an appropriate message
automatically appears on the screen.

➜

Activate the checkbox “Enable popup“ so that popup messages
appear automatically on the screen.

Changing the hotkey command for the Status Monitor (Setup menu)

You can change the key combination for calling up the Status Monitor.

➜

Press the desired keys in succession in order to define a new key
combination for calling up the Status Monitor.

Defining popup messages (Setup menu)

You can specify which printer faults cause a popup message to appear on
the screen.

➜

Mark one of the error messages and press [ENTER] in order to change
the status of the error message.
Active

= show popup message

Inactive

= suppress popup message

Summary of Contents for LP 210



































































































































































Search results

Summary of Contents for LP 210

Reviews:

Related manuals for LP 210

Brands by name

Popular brands

Triumph Adler LP 210, Instruction Handbook Manual

Search results

Summary of Contents for LP 210

Reviews:

Related manuals for LP 210

Brands by name

Popular brands