Triumph Adler CLP 4316, Instruction Handbook Manual

Page: 47 / 148

Using the Operator Panel
ADVANCED OPERATION GUIDE 2-21
Printing Remaining Copies of a Proof and Hold Job
Printing a Proof-and-Hold job on the operator panel is similar to printing a
quick copy job.
See Printing Additional Copies using Quick Copy on page
2-19.
Printing a Private Print/Stored Job
In private printing, you can specify that a job is not printed until you release
the job from the operator panel. When sending the job from the application
software, specify a 4-digit access code in the printer driver. The job is
released for printing by entering the access code on the operator panel
ensuring confidentiality of the print job.
In the stored job mode, access codes are not mandatory, but can be set
on the printer driver if printing with PIN security is required. Then, the
access code must be entered on the operator panel to print a stored job.
Print data will be stored in the hard disk after printing. See
KX Printer
Drivers Operation Guide for the driver settings.
Releasing a Private/Stored Job
1 Press [MENU] .
2
Press
U
or
V
repeatedly until
e-MPS >
appears.
3
Press
Z
.
4 Press
U
or
V
repeatedly until
>Private/
Stored
appears. The name entered in the
printer driver (
Harold
, in this example) also
appears.
5 Press [OK] ([ENTER]) . A blinking question
mark (
?
) appears before the user name.
6 Press
U
or
V
to display the desired user
name (
Arlen
, in this example).
7 Press [OK] ([ENTER]) . The user name and
the job name (
Agenda
, in this example)
entered in the printer driver appear with a
blinking question mark (
?
).
8
Press
U
or
V
to display the desired job title.
e-MPS >
>Private/Stored
Harold
>Private/Stored
?Harold
>Private/Stored
?Arlen
>Arlen
?Agenda