Triumph Adler CLP 4316, Instruction Handbook Manual

Page: 76 / 148

Using the Operator Panel
2-50 ADVANCED OPERATION GUIDE
Gloss Mode
Gloss mode, when set to
High
, increases the effect of glossiness in
printing by reducing the printing speed by half. Gloss mode is not available
when
Transparency
is selected as the paper type setting.
NOTE:
Depending on the paper used, printing in gloss mode may cause
wrinkle in paper. To reduce wrinkle, try using thicker paper.
1
Press [MENU] .
2 Press
U
or
V
repeatedly until
Print
Quality >
appears.
3 Press
Z
.
4
Press
U
or
V
repeatedly until
>Gloss
Mode
appears.
5
To change the gloss mode, press [OK]
([ENTER]) . A blinking question mark (
?
)
appears.
6
Press
U
or
V
to change from
Low
to
High
.
7 Press [OK] ([ENTER]) to finalize the selection.
8
Press [MENU] . The display returns to
Ready
.
Print Quality >
>Gloss Mode
Low
>Gloss Mode
? Low