Triumph Adler CLP 4316, Instruction Handbook Manual

Page: 96 / 148

Using the Operator Panel
2-70 ADVANCED OPERATION GUIDE
Creating Custom Paper Type
The following describes the procedure used to set a user-defined paper
type for the printer. Eight custom user settings may be registered. After
having been set, any of these may be called up when setting the paper
type for a paper source.
The paper weight and duplex path can be set (see Setting the Paper
Weight on page 2-71 , and Setting the Duplex Path on page 2-71 ) after
selecting the paper type to be customized as follows. For how to reset the
customized settings, see
Resetting the Custom Paper Type on page 2-72 .
1 Press [MENU] .
2 Press
U
or
V
repeatedly until
Paper
Handling >
appears.
3
Press
Z
.
4 Press
U
or
V
repeatedly until
>Type
Adjust >
appears.
5
Press [OK] ([ENTER]) . A blinking question
mark (
?
) appears.
6
Press
U
or
V
to display the desired paper type. The display changes as
shown below.
Custom 1 (to 8)
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Coated
Thick
High quality
7
When the paper type to be customized is displayed, press [OK]
([ENTER]) .
Paper Handling >
>Type Adjust >
Custom 1
>Type Adjust
? Custom 1