Operator Manual
Issue 1
TIL – Eng – Spec – 080
Page 4 of 70
SeaHub
7. Hardware Configuration & Maintenance ............................................................................................ 45
7.1. Opening the SeaHub housing ................................................................................................. 46
7.2. Resetting the Software Default Settings ................................................................................. 47
7.3. Selecting the DC “Power Out” Supply Voltage & Ground ....................................................... 48
7.4. Checking & Replacing Fuses .................................................................................................. 51
7.4.1. Checking/replacing the AC “Mains” fuse ..................................................................... 51
7.4.2. Checking/replacing the DC Main Output Power (+28V Supply) Fuse ......................... 52
7.4.3. Checking/replacing the DC Ext Output Power (+12V & +5V Supply) Fuses ............... 53
7.5. Making Pin 5 link between Ports C-D for ArcNet Dual Profiler ............................................... 54
7.6. Changing the ArcNet Power Supply ....................................................................................... 55
7.7. Changing the ArcNet Termination Resistor ............................................................................ 56
7.8. Enabling the legacy Serial Port on the AIF connector ............................................................ 57
7.9. Firmware & Software Update Procedure ................................................................................ 59
7.9.1. Updating the SeaHub with the new software BinFile ................................................... 59
7.9.2. Updating the SeaHub with new FPGA firmware .......................................................... 60
7.10. Portable Appliance Testing Guidelines ................................................................................. 62
8. Troubleshooting ................................................................................................................................... 63
9. Technical Specifications ...................................................................................................................... 66
9.1. Electrical .................................................................................................................................. 66
9.2. Software .................................................................................................................................. 68
9.3. Environmental ......................................................................................................................... 69
9.4. Statutory Compliances ............................................................................................................ 69
9.5. Mechanical .............................................................................................................................. 70
2. Notices
2.1. Trademarks
•
Microsoft and Windows 98, Windows ME, Windows 2000 and Windows XP are registered
trademarks of the Microsoft Corporation
•
IBM and AT are registered trademarks of International Business Computers.
•
AMD is a registered trademark of Advanced Micro Devices.
•
Intel and Pentium is a trademark of the Intel Corporation
Tritech International Limited reserved the right to change, modify and update designs and specifications
as part of their ongoing product development programme.
Whilst every effort is taken to keep all the information contained in this document up to date, information
in this document is subject to change without notice and does not represent a commitment on the part of
Tritech International or System Technologies.
