Operator Manual
Issue 1
TIL – Eng – Spec – 080
Page 24 of 70
SeaHub
4.4. Software & Driver Un-installation
At times it may be desirable to remove Seanet software and the SeaHub serial drivers from the PC.
Follow the procedure below to achieve this.
1) Open the windows “Control Panel”, and
select “Add/Remove Programs”
Follow the procedure below for the software
you wish to remove.
Add or Remove Programs
4.4.1. Serial Driver Un-installation
2) To remove the serial drivers for the
SeaHub, select “FTDI USB Serial
Converter Drivers” from the list, and click
the “Change/Remove” button.
3) The serial driver un-installation program will
be run, and display the screen shown
opposite.
4) Power down and disconnect the SeaHub
unit from the PC, then click “Continue” to
proceed with the un-installation.
5) When un-installation is complete control
will return to the “Add or Remove Program”
window.
4.4.2. Seanet Un-installation
6) To remove the Seanet software select
“Seanet Pro” from the list, and click the
“Remove” button.
7) When prompted click the “Yes” button to
confirm un-installation.
8) Un-installation will commence. This make
take several seconds.
9) Click “Close” when complete to finish the
task.
